| Manufacturer |
Model- |
|
|
Price |
Electrovoice |
309A |
 |
Suspension shockmount for RE20, RE27N/D, black. |
£192.21
|
Electrovoice |
311 |
|
3/4" stand adaptor for N/D468, RE200B, RE90P, PolarChoice. |
£27.22
|
Electrovoice |
314E |
|
Winscreen for 635A, grey, 3/4". |
£30.62
|
Electrovoice |
320 |
|
Stand clamp for RE20, RE27N/D, N/D868, black. |
£64.64
|
Electrovoice |
323S |
|
Stand Clamp for EV 1" diameter mics (e.g. RE510, 267A, 367S, 767A), black. |
£21.26
|
Electrovoice |
368 |
|
Drum microphone mounting clamp for N/D468. |
£29.77
|
Electrovoice |
379-1 |
|
Windscreen pop filter for N/DYM microphones, RE16, RE50, N/D967, 767a, 367s, 267a, RE410 and RE510. Black, 1". |
£28.92
|
Electrovoice |
422A |
|
Desk stand with rubber shock mount that accepts mic stand clamps. |
£89.30
|
Shure |
A100WS |
|
Foam windscreen for KSM137 & KSM141. |
£8.40
|
Shure |
A12 |
|
Mounting flange, 5/8" thread, silver. |
£6.25
|
Shure |
A120S |
 |
In-line switch, momentary or latching. |
£22.50
|
Shure |
A137C |
|
Carry case for a single KSM137. |
£39.95
|
Shure |
A137SPC |
|
Carry case for a pair of KSM137's. |
£39.95
|
Shure |
A13HD |
|
Heavy duty flange, 5/8" thread, silver. |
£9.25
|
Shure |
A13HDB |
|
Heavy duty flange, 5/8" thread, black. |
£13.25
|
Shure |
A141C |
|
Carry case for a single KSM141. |
£39.95
|
Shure |
A141SPC |
|
Carry case for a pair of KSM141's. |
£39.95
|
Shure |
A15AS |
 |
Mic attenuator, 15/20/25dB. |
£51.75
|
Shure |
A15BT |
 |
Bridging transformer, matches devices of different impedances. |
£48.95
|
Shure |
A15HP |
 |
High pass filter -12dB per octave below 100Hz. |
£57.25
|
Shure |
A15LA |
 |
Line to mic adaptor, -50dB attenuation. |
£43.50
|
Shure |
A15PRS |
 |
Phase reverser, switchable. |
£61.90
|
Shure |
A15TG |
 |
Tone generator - 700Hz mic level signal, switchable. |
£175.00
|
Shure |
A1WS |
|
Windscreen - 515, Beta 56/57, 10A. |
£5.30
|
Shure |
A25DM |
|
Standard Shure mic clip - SM58 etc. |
£3.75
|
Shure |
A26M |
|
Dual microphone mount, vertical. |
£63.75
|
Shure |
A27M |
|
Stereo microphone adaptor, 2 mics on 1 stand. |
£69.95
|
Shure |
A27SM |
 |
Elastic suspension shock mount for use with Shure SM27 and KSM27 microphones. |
£64.95
|
Shure |
A313M |
|
Mount, custom swivel monocle, for KSM313. |
£130.00
|
Shure |
A313SM |
|
Shock mount, elastic suspension, for KSM313. |
£66.00
|
Shure |
A32M |
|
Swivel adaptor for KSM32/27, black. |
£59.50
|
Shure |
A32SM |
|
Shock mount adaptor for KSM32. |
£136.96
|
Shure |
A32WS |
|
Foam windscreen for KSM32, grey. |
£11.50
|
Shure |
A353SM |
|
Shock mount, spring-loaded suspension, for KSM353. |
£88.00
|
Shure |
A3WS |
|
Windscreen - PG81, SM94, BG4, 849, KSM109. |
£7.60
|
Shure |
A400SM |
|
Gooseneck shock mount for MX412/8 & MX412S/8S. |
£24.60
|
Shure |
A400SMXLR |
|
Gooseneck shock mount, with XLR insert (A400SM + A400XLR). |
£38.50
|
Shure |
A400XLR |
|
XLR shock mount, insert for A400SM. |
£21.50
|
Shure |
A412B |
|
Desk stand for pre-amp base MX412/8. |
£66.40
|
Shure |
A412MWS |
|
Locking metal windscreen for MX412/8. |
£18.50
|
Shure |
A44M |
|
Shurelock swivel mount for KSM44, champagne. |
£65.00
|
Shure |
A44SM |
|
Shurelock elastic-suspension shock mount for KSM44, champagne. |
£135.00
|
Shure |
A4WS |
|
Windscreen - 16A and 16L. |
£6.00
|
Shure |
A50D |
 |
Microphone drum mount - rim clip (PG). |
£15.00
|
Shure |
A53M |
 |
Shock Stopper (TM) narrow microphone clip - SM81, SM94, VP64, KSM137 and KSM141. |
£35.00
|
Shure |
A55HM |
 |
As A55M but half-mount/quick release. |
£41.50
|
Shure |
A55M |
|
Shock Stopper (TM)microphone clip for SM58/tapered mics. |
£24.50
|
Shure |
A56D |
|
Microphone drum mount - universal clamp, rim or stand. |
£44.00
|
Shure |
A57F |
|
Narrow microphone clip - SM81, VP64, SM63. |
£5.25
|
Shure |
A58WS/COLS |
|
Windscreen - SM58/similar, colours. |
£4.75
|
Shure |
A7WS |
|
Windscreen - SM7 - close talk. |
£24.50
|
Shure |
A81WS |
|
Windscreen, large foam - SM81, SM57. |
£29.50
|
Shure |
A85F |
 |
Low to high impedance adaptor, economy, 24dB gain, female XLR - 1/4" phono plug. |
£16.50
|
Shure |
A88SM |
|
Shock mount for VP88 |
£185.00
|
Shure |
A89SM |
 |
Shock mount for SM89. |
£122.50
|
Shure |
A95U |
 |
Low to high impedance adaptor, 24dB gain, male XLR - 1/4" phono plug. |
£49.90
|
Shure |
A95UF |
 |
Low to high impedance adaptor, 24dB gain, female XLR - 1/4" phono plug. |
£54.90
|
Shure |
A96F |
 |
Low to medium impedance adaptor, camcorder, 3.5mm mini jack output. |
£69.90
|
Shure |
A99SMA |
|
Adaptor to retrofit SM99 with MX400 series microphones. |
£13.90
|
Audac |
APM |
 |
The APM is a microphone base, designed to be used with the CMX series
gooseneck microphones (or any other gooseneck microphone with XLR
connector) on any amplifier with microphone inputs. |
£61.50
|
Audio Technica |
AT8161 |
|
Metal windshield with additional outer foam. |
£56.67
|
Audio Technica |
AT8473 |
 |
Stand clamp - permits attachment of the gooseneck mic base to a standard 5/8 or 3/8 threaded stand or flange. |
£22.50
|
Audio Technica |
AT8474 |
 |
Low-profile isolation mount. |
£30.83
|
Audio Technica |
AT8671 |
|
Rack mount tray for 1 receiver, ATW 700 series. |
£32.50
|
Audio Technica |
AT8672 |
|
Rack mount tray for 2 receivers, ATW 700 series. |
£32.50
|
AKG |
B29 L |
 |
Battery power supply unit for MM, III, 'L' version microphones. |
£49.17
|
Rode |
BLIMP |
 |
Complete windshield and pistol grip system for NTG series shotgun microphones, and all third party shotgun mics up to 425mm in length. |
£215.83
|
Rode |
BOOMPOLE |
|
Telescopic boom pole. Extends to 3m. Suits VideoMic, NTG1 & NTG2. |
£87.49
|
Clockaudio |
CA900 |
 |
1200mm Rigid Shaft with Tiny QG connector. Long Shaft includes Phantom Power adaptor at bottom end terminated in Male 3 pin XLR. Knuckle joint at microphone end terminated with Tini QG 3 pin female connector. Short shaft connects to SM 155 floor mounting, shock absorbing base (not included).
|
£162.50
|
Clockaudio |
CA900-RF |
|
Floor Standing 900m Long Shaft. Long Shaft includes Phantom Power Adaptor at bottom end terminated in. Knuckle joint at microphone end terminated with Tini QG 3 pin female. Short shaft connects to SM 155 floor mounting, shock absorbing base (not included). |
£151.45
|
Audac |
CAB761/0.1 |
|
Adapter cable for CMX microphone to Sennheiser beltpack. |
£6.15
|
Clockaudio |
CAK1 |
 |
Phantom power adaptor with knuckle joint and Tini Q connector. |
£102.05
|
Clockaudio |
CH32 |
 |
Litetouch Dual Colour Halo Ring & Touch Pad Switch. For use with C003E, C004E, C011E & C012E Boundary Microphone Models (SUPPLIED SEPARATELY). Designed for remote switching. Housing 32 LEDs to give 360° illumination. 12, 24v DC operation. Current consumption 40mA. Retrofittable to all Clockaudio through-table microphones. Fitted with 5 way socket terminal block supplied with fixing screws. Available in white or smoked. |
£76.05
|
Rode |
CLIP1 |
|
Cable management clip for HS1 and Lavalier models. Pack of 3. |
£14.16
|
Rode |
CLIP2 |
|
Discrete mounting clip for Lavalier model. Pack of 3. |
£17.49
|
Audac |
CMP401 |
 |
The CMP401 is a Microphone Phantom Power adapter, featuring a 4-pin Mini XLR input connector and a 3-pin XLR output connector. It
is designed to enable the use of Mini-Headset, Lavalier or other small
condenser microphones with a 4-pin Mini-XLR connector in any wired
microphone configuration. |
£33.83
|
Audac |
CMT500 |
 |
The CMT500 is an acoustic reference microphone with an
omnidirectional pickup pattern based on a small & accurate back
elektret condenser capsule.It is especially designed to be used for all
kinds of measurement applications, such as noise monitoring purposes,
room acoustic measurements or speaker measurements. In combination
with the CMT510 outdoor kit, the CMT500 can also be used for permanent
outdoor installation in all weather conditions. This combination makes
the CMT500 the perfect solution for permanent outdoor noise monitoring
systems. |
£184.50
|
Audac |
CMT510 |
 |
In combination
with the CMT510 outdoor kit, the CMT500 can also be used for permanent
outdoor installation in all weather conditions. This combination makes
the CMT500 + CMT510 the perfect solution for permanent outdoor noise monitoring
systems. |
£94.30
|
Audac |
CMX200 |
 |
The CMX200-series is a 360° revolving pipe-neck condenser microphone,
designed to be used for conferences, sound reinforcements, translations
and studio applications. It has a high sensitive condenser element with
a unidirectional cardioid polar pattern which ensures an excellent
sound quality and reduces the feedback to a strict minimum, even when
exposed to vigorous, hard sound. Available in 35mm or 55mm version.
|
£135.30
|
Electrovoice |
CPSM |
|
Desk top shock mount for RE90P, PolarChoice. |
£45.08
|
Rode |
DEADCAT |
 |
High Wind cover for VideoMic, NTG1 & NTG2. |
£29.16
|
Rode |
DEADKITTEN |
 |
High Wind cover for Stereo VideoMic. |
£24.16
|
Samson Audio |
DMC100 |
 |
3 piece set of drum mic clips, allows for easy clip on microphone rim mounting for most drum and percussion instruments, with adjustable height and swivel. |
£19.99
|
Electrovoice |
DRC-1 |
|
Drum rim clamp for PL35. |
£23.81
|
Audio Technica |
ESE-C |
|
Cardioid element only. |
£55.00
|
Audio Technica |
ESE-H |
|
Hypercardioid element only. |
£55.00
|
Audio Technica |
ESE-ML |
|
Microline element only. |
£74.17
|
Audio Technica |
ESE-O |
|
Omnidirectional element only. |
£55.00
|
Shure |
G12 |
|
12" gooseneck, silver. |
£12.25
|
Shure |
G12B |
 |
12" gooseneck - black. |
£17.50
|
Shure |
G18A |
 |
18" gooseneck - silver, side exit/entry. |
£14.50
|
Shure |
G27B |
 |
27" gooseneck - black. |
£21.00
|
Shure |
G6A |
 |
6" gooseneck - silver, side exit/entry. |
£9.95
|
AKG |
H30 |
 |
Universal shockmount. |
£40.83
|
AKG |
H50 |
 |
Stereo bar for mounting two microphones 60mm to 170mm apart. |
£32.50
|
AKG |
H85 |
 |
Universal shockmount for mics with shaft diameters from 19mm to 26mm. |
£45.00
|
Clockaudio |
LB001 |
 |
Digital mute switching box allowing pop/noise free muting of a microphone when used with an electronic touch sensor switch, suitable for use with Clockaudio electronic capacitor touch switch models: CH32, TS001, TS002. Standard Tini Q (mini XLR) microphone Input / Output sockets are fitted to the metal case. Tini Q input connector with 0.5 Metre cable to bare end is supplied with the product. Connection to the touch sensor switch is via a Phoenix block. Dip switch is provided inside the unit to allow the standard default
of press to mute to be changed to two other formats of latching modes
muted or unmuted, and 2 x momentary switching modes with 80 second time
out. Requires 12 VDC power adaptor (PS012). Aluminium box construction has a blue power led indicator and red / green status led's. |
£157.95
|
Samson Audio |
MC-1 |
|
Mic clip for all mics. |
£6.99
|
Rode |
MICON Cable 1.2m |
|
1.2m MiCon extension cable for HS1, Lavalier, & PinMic models. |
£22.49
|
Rode |
MICON Cable 3m |
|
3m MiCon extension cable for HS1, Lavalier, & PinMic models. |
£27.49
|
Rode |
MICON-1 |
|
MiCon adaptor for HS1, Lavalier and Pinmic models. Locking minijack connector compatible with Sennheiser SK500G3, SK300G3, SK100G3, SK500G2, SK300G2 and SK2Freeport. |
£12.08
|
Rode |
MICON-2 |
|
MiCon adaptor for HS1, Lavalier and Pinmic models. 3.5mm stereo minijack connector (1V minimum power supply). |
£12.08
|
Rode |
MICON-3 |
|
MiCon adaptor for HS1, Lavalier and PinMic models. Miniature multipin adaptor compatible with Shure UR1, UR1M, ULX1, SLX1, PGX1, & PG1. |
£15.41
|
Rode |
MICON-4 |
|
MiCon adaptor for HS1, Lavalier and PinMic models. Miniature multipin adaptor compatible with Audio Technica UniPak Body-Pack Series 1800, 2000 & 3000. |
£18.74
|
Rode |
MICON-5 |
|
MiCon adaptor for HS1, Lavalier and PinMic models. 3-pin XLR connector for 48V phantom power. |
£18.74
|
Rode |
MINIBOOMPOLE |
 |
Telescopic boom pole. Extends to 2m. Suits VideoMic, NTG1 & NTG2. |
£79.16
|
Rode |
MINIFUR-HS1 |
|
High quality miniature furry windshield for Rode HS1. Pack of 3. |
£18.33
|
Rode |
MINIFUR-LAV |
|
High quality miniature furry windshield for Rode Lavalier. Pack of 3. |
£12.08
|
Audac |
MP100 |
|
Power adapter for condenser microphones. |
£28.70
|
AKG |
MPA VL |
 |
In line XLR phantom power adaptor for ML & L version microphones. |
£49.17
|
Audac |
MWS200 |
 |
Windscreen for CMX200. |
£3.24
|
Audac |
MWS220 |
 |
Windscreen for CMX220. |
£2.42
|
Audac |
MWS380 |
 |
Windscreen for CMX380. |
£3.24
|
Audac |
MWS700 |
 |
Windscreen for CMX700 / 705 / 720 / 725. Available in black or skin tone. |
£2.42
|
Rode |
NTSM1 |
 |
Suspension mount for NT1, NT1A, NT2, & NTV. |
£57.50
|
Rode |
NTSM2 |
 |
Suspension mount for NTK, NT1000, NT2000, NT2A, K2 & Classic II. |
£65.83
|
Rode |
NTSM3 |
 |
Suspension with hot shoe fitting for NT3, NT4, NT5, & NTG series. |
£40.83
|
Rode |
NTSM4 |
 |
Suspension with stand mount thread for NT3, NT4, NT5, & NTG series. |
£40.83
|
Rode |
NTSM5 |
 |
Suspension with camera mount for NT3, NT4, NT5, & NTG series. |
£40.83
|
Rode |
NTSM6 |
 |
Combined suspension mount and popshield for NT1A, NT1000, NT2A, NT2000, NTK, K2, Podcaster, and Procaster. |
£49.99
|
AKG |
PF80 |
 |
Pop filter. |
£49.17
|
Rode |
PG 1 |
 |
Cold shoe pistol grip for VideoMic and Stereo VideoMic. |
£11.66
|
Rode |
PG 2 |
 |
Combined pistol grip and shockmount for NTG series shotgun microphones. |
£57.50
|
Samson Audio |
PM6 |
|
Power supply for QV10E/QL5/QV/QE/MT350 microphones. |
£29.99
|
Shure |
PS-6 |
|
Popper Stopper (TM), 6" diameter, 14" gooseneck. |
£35.50
|
Samson Audio |
PS01 |
 |
Pop filter with nylon mesh screen that reduces vocal popping and sibilance, universal mic stand mounting bracket and flexible metal gooseneck. |
£14.99
|
Shure |
RK100PK |
|
Pre-amplifier, in-line, for MX183/4/5, MX202, MX412SE, & MX391. Available in black or white. |
£115.00
|
Shure |
RK183PKW |
|
Pre-amplifier, in-line, white, for MX183/4/5, MX202W, MX412SE, & MX391. |
£115.00
|
Shure |
RK183T1 |
|
Tie-clip, single, for MX183/4/5 & WL183/4/5. |
£15.30
|
Shure |
RK183T2 |
|
Tie-clip, dual, for MX183/4/5 & WL183/4/5. |
£15.70
|
Shure |
RK183WS |
|
Snap-fit windscreen for Beta 98/S, MX183/4/5, MX202, WH30, WL183/4/5. |
£18.30
|
Shure |
RK412WS |
|
Snap-fit windscreen for MX 412/8. |
£18.30
|
Clockaudio |
S120 |
 |
120mm microphone base with M10 screw thread mounting hole. |
£62.73
|
Clockaudio |
S120S |
 |
As S120 with press to talk or latching switch. |
£69.55
|
Clockaudio |
S120X |
 |
120mm microphone base with 3 pin XLR (F). |
£81.90
|
Clockaudio |
S120X-2 |
 |
120mm table base pre-wired with 2m cable to 3 pin m/XLR. |
£91.00
|
Clockaudio |
S120X5 |
|
120mm table base with 5 pin XLR. |
£91.00
|
Clockaudio |
S120X5-2 |
 |
120mm diameter table microphone base fitted with PTT Switch and M10x screw thread mounting hole. Comes with 2m cable, 5 pin XLR male. |
£119.93
|
Clockaudio |
S120XS |
|
As S120X with press to talk or latching switch. |
£97.50
|
Clockaudio |
S133-RF |
 |
Microphone base stand with programmable switch and LED. 3 pin XLR in and out. |
£115.38
|
Clockaudio |
S135-RF |
 |
Microphone base stand with programmable switch and LED. 3 pin XLR in and 5 pin XLR out for remote programming. |
£115.38
|
Clockaudio |
S140-RF |
|
Microphone base stand with programmable switch and LED. 3 pin Tini Q in, 5 pin XLR out and integral PPA. |
£115.38
|
Clockaudio |
S155-RF |
 |
Desk stand with fully programmable touch pad for PTT, PTM & Latching modes. Red led indicator illuminates when a microphone is live.Power requirements: 48 Volt Phantom supply. A male 5 pin XLR plug is provided for input connection and 5 pin
female socket mounted on the rear of the product is provided for output
connection. Fully protected against RF interference which will eliminate all GSM frequencies from 800-1200 MHz. Finish: satin black. |
£147.88
|
Shure |
S15A |
 |
Telescopic studio microphone stand - 15". |
£175.00
|
Clockaudio |
S210X |
 |
Microphone boom floor stand and boom arm combination with XLR connectors. Ideal for CW9006.
|
£155.68
|
Shure |
S37A |
|
Rectangular table stand. |
£25.00
|
Clockaudio |
S750 |
 |
Table top microphone base with knuckle joint and 3m cable. |
£97.50
|
Clockaudio |
S80S |
 |
Low profile throuhg table shock mount, black, with PTT/latching switch & bi-colour LED to confirm status. Available in black or nickel finish.
|
£106.60
|
Clockaudio |
SA3 |
 |
13mm jaw, swivel microphone holder and stand adaptor, 5/8" - 3/8" female thread. |
£14.63
|
Clockaudio |
SA5 |
 |
28mm jaw, swivel microphone holder and stand adaptor, with 5/8" ~ 3/8" female thread and black rubber finish resistant to damage and microphone scratching. |
£14.63
|
AKG |
SA60 |
 |
Stand adaptor for straight shaft microphones. |
£15.83
|
AKG |
SA61 |
 |
Stand adaptor for tapered shaft microphones. |
£15.83
|
AKG |
SA63 |
 |
Stand adaptor. |
£15.83
|
Electrovoice |
SAPL-1 |
|
Microphone stand adaptor for all PL series vocal microphones. |
£17.86
|
Electrovoice |
SAPL-2 |
|
Microphone stand adaptor for PL33 (also fits RE20, RE27N/D & N/D868). |
£44.23
|
Electrovoice |
SAPL-3 |
|
Isolating shock mount stand adaptor for PL37. |
£16.16
|
Clockaudio |
SM10 |
 |
Low Profile Thru-table Shock Mount with 3 pin female XLR input and 3 pin male XLR output, manufactured in high quality brass. |
£61.75
|
Clockaudio |
SM110 |
 |
Shock absorbing table stand with SA3 microphone holder. |
£40.30
|
Clockaudio |
SM155 |
 |
Floor mounting shock absorbing microphone base for CA900 & CA700, diameter of 15mm and height of 42.5mm.
|
£100.43
|
Clockaudio |
SM20-RF |
 |
Low profile, through-table shock mount. RF immunity. Integral PPA. 3 pin m/Tini Q to XLR. Black nextel. |
£104.33
|
Clockaudio |
SM70 |
 |
Low profile, surface fitting shock mount. Matt black.
|
£26.98
|
Clockaudio |
SM75 |
 |
Shock absorbing base for fitting above or below the surface. |
£85.15
|
Clockaudio |
SM80 |
 |
Through-table microphone mount with protective flip cover. 3 pin XLR. Available in black or satin nickel. |
£131.30
|
Clockaudio |
SM80-RF |
|
Through-table microphone mount, RF immune, with protective flip cover and integral PPA. 3 pin XLR. Available in black or satin nickel. |
£202.80
|
Clockaudio |
SM80S |
 |
Through-table shock mount flip cover, switch and LED, 3 pin XLR. Available in black or satin nickel. |
£146.90
|
Clockaudio |
SM93 |
 |
Surface fitting microphone shock mount, with 3 pin F-XLR, screw terminals. |
£32.50
|
Clockaudio |
SM95 |
 |
As SM93 with 5 pin F-XLR. |
£32.50
|
Samson Audio |
SMS1 |
 |
Shock mounted flange mount, for CM15P and CM20P. |
£8.99
|
Samson Audio |
SP01 |
 |
Spider mount for C01, C03, CL7, CL8 and C01U condenser mics. |
£34.99
|
AKG |
ST45 |
 |
Low profile table stand. |
£57.50
|
AKG |
ST46 |
 |
Miniature table stand. |
£49.17
|
Clockaudio |
TS001 |
 |
Touch Sensitive Switch with Bi-Colour LED Halo, designed for remote switching, housing 10 LEDs to give all round illumination. 12 or 24v DC operation, current consumption 40mA. Supplied with 5 core ribbon cable + connector. Available in white or opaque finish. The TS001 allows users to easily identify the status of Microphones,
as well as mute the units for privacy. With no moving parts, the switch
is touch-sensitive, so there are no clicking noises when switching from
one status to another. Both the switch and the Halo have been designed to operate remotely
with all popular brands of electronic system control, so an integrator
has complete freedom to assign function and LED colour. |
£85.74
|
Shure |
URT |
 |
Rack tray for PG & PGX receivers, 1U. |
£33.08
|
AKG |
W 23 |
 |
50mm foam windscreen for ball head microphones. |
£15.00
|
AKG |
W 30 |
 |
Foam windscreen for use with CK 31, CK 32 and CG 33. |
£5.00
|
AKG |
W 32 |
 |
Foam windscreen 18-20mm for use with CK 61 ULS etc. |
£10.00
|
AKG |
W 77 M |
 |
Black wire mesh windscreen for use with CK 77 WR. C477 WR and C577 WR. |
£30.00
|
Clockaudio |
W2 |
|
Windsheild for C2 & C3 series. |
£5.53
|
Clockaudio |
W8 |
|
Windsheild for C800 series. |
£11.38
|
Clockaudio |
W85 |
|
Windshield for C850E shotgun microphone. |
£23.40
|
Rode |
WS-HS1B/P |
|
High quality pop filter for Rode HS1-B/P. Available in pink or black. Pack of 3. |
£10.83
|
Rode |
WS-LAV |
|
High quality black pop filter for Rode Lavalier. Pack of 3. |
£10.83
|
Samson Audio |
WS03 |
|
Windscreen. |
£3.99
|
Samson Audio |
WS1 |
|
5-pack of foam windscreens, greatly reduces occurances of popping and wind noise and fits many popular handheld microphones. |
£7.99
|
Samson Audio |
WS5E |
 |
Headset foam windscreens (5-pack, multi-colours), greatly reduces occurrences of P-popping; fits many popular headset microphones (including Samson Qe, Qv).
|
£6.49
|
Electrovoice |
WSPL-1 |
|
Foam windscreen (black) for PL24, PL24S, PL44, PL80A, PL80C, PL84, PL84S. |
£17.86
|
Electrovoice |
WSPL-2 |
|
Foam windscreen (black) for PL33 (also fits RE20 & RE27N/D). |
£17.86
|
Electrovoice |
WSPL-3 |
|
Foam windscreen (black) for PL35. |
£17.86
|
Electrovoice |
WSPL-4 |
|
Foam windscreen (black) for PL37 (also fits RE200). |
£17.86
|
Shure |
X2U |
 |
XLR-to-USB adaptor with gain & monitor mix control. |
£119.44
|
Samson Audio |
XFM1 |
 |
XFM1 - XLR flange mount with cable, for CM15P and CM20P. |
£14.99
|
Beyer |
ZSH210 |
 |
Base plate for Revoluto microphone MPR210/211, 5/8" with threaded adaptor 3/8", black. |
£33.49
|
Beyer |
ZSH23FG |
 |
Stand adaptor with 3-pin XLR female and cable (bare ends), for goosenecks/microphones with 3-pin XLR male. |
£88.01
|
Beyer |
ZSH23FT |
 |
Base plate with 3-pin XLR female and cable, for goosenecks/microphones with 3-pin XLR male. |
£123.39
|
Beyer |
ZSH25FT |
 |
Base plate with 5-pin XLR female and cable, for goosenecks/microphones with 5-pin XLR male. |
£132.97
|
Beyer |
ZSH40-3/8" |
 |
Base plate 3/8", footfall sound insulation, diameter 78mm (3.07"), for goosenecks with 3/8" thread. |
£75.58
|
Beyer |
ZSH50CM |
 |
Base plate with rubber pad, with 3-pin XLR and cable (bare ends), for goosenecks/microphones with 3-pin XLR female. |
£103.31
|
