| Manufacturer |
Model- |
|
|
Price |
Amina |
100T |
 |
8W, 20W or 40W 100V line high quality torroidal transformer built into AIWX speakers, must be ordered with speaker. |
£50.00
|
JBL |
8124 |
 |
4" open-packed ceiling speaker. 70/100V transformer with taps at 6W, 3W, 1.5W (plus 0.75W at 70V only). 93dB sensitivity, 60Hz-18kHz frequency response for non-plenum applications.
Priced, packaged and sold as fours. |
£140.00
|
JBL |
8128 |
 |
8" open-packed ceiling speaker. 70/100V transformer with taps at 6W, 3W, 1.5W (plus 0.75W at 70V only). 97dB sensitivity, 50Hz-16kHz frequency response for non-plenum applications.
Priced, packaged and sold as fours. |
£180.00
|
JBL |
8138 |
 |
8" ceiling speaker for pre-install backcan. 70/100V transformer with taps at 6W, 3W, 1.5W (plus 0.75W at 70V only). 97dB sensitivity, 90Hz-18kHz frequency response. 90° coverage.
Priced, packaged and sold as fours. |
£200.00
|
Amina |
ACPT544E |
 |
The Amina ACPT544E loudspeaker is a compact, slim-line, high efficiency
stand or wall mount loudspeaker (see SPASTD and HDWB. Panels can also be fitted with eyebolts). For use in corporate, leisure, retail,
heritage, theatre, worship or in a portable PA system, the ACPT544E
ultilises Amina’s revolutionary flat panel technology to provide high
clarity sound in a flexible package. Featuring clear panel skin with visible brown honeycomb core, silver anodised aluminium mitre cut frame, industrial clip electrical connector (4 pole speakon connector available as alternative - state at time of purchase), and punched rear protective grille. Other finishes are available, including flocking, painting, and printed digital images / artwork. Panel size: 450mm x 345mm; Product outside dimensions: 456 x 351 x 53mm. |
£750.00
|
QSC |
AD-C1200 |
 |
12" high power ceiling speaker assembly. |
£619.00
|
QSC |
AD-C1200BB |
|
Backbox for AD-C1200. |
£255.00
|
QSC |
AD-C1200SG |
|
Square grille for AD-C1200. |
£37.00
|
QSC |
AD-C42T |
 |
4" weather resistant ceiling speaker, 2-way, with 70V/100V transformer and 8 ohm bypass. Sold as a pair. |
£219.00
|
QSC |
AD-C800BB |
|
Backbox, required for AD-C820. |
£91.00
|
QSC |
AD-C800RG |
|
Round grille for AD-C820/821 (grilles are optional but ONLY QSC grilles will fit the speaker assembly). |
£37.00
|
QSC |
AD-C800SG |
|
Square grille for AD-C820/821 (grilles are optional but ONLY QSC grilles will fit the speaker assembly). |
£37.00
|
QSC |
AD-C81Tw |
 |
8" weather resistant ceiling subwoofer, 120Hz bypassable low pass filter, with 70V/100V transformer and 8 ohm bypass. Sold as a pair. |
£259.00
|
QSC |
AD-C820 |
 |
8" high power ceiling speaker assembly. |
£349.00
|
QSC |
AD-C821 |
 |
8" high power ceiling speaker assembly (integrated). |
£479.00
|
QSC |
AD-Ci52ST |
 |
5.25" weather resistant ceiling speaker, 2-way, shallow can, with 70V/100V transformer and 8 ohm bypass. Sold as a pair. |
£349.00
|
QSC |
AD-Ci52T |
 |
5.25" weather resistant ceiling speaker, compact 2-way, with 70V/100V transformer and 8 ohm bypass. Sold as a pair. |
£319.00
|
QSC |
ADC-MR x 6 |
|
Mud ring bracket for installation of AD-Ci52T in concrete or plaster surfaces (priced and packed in quantities of 6 pieces per box). |
£120.00
|
QSC |
ADC-MRS x 6 |
|
Mud ring bracket (shallow version) for installation of AD-Ci52ST in concrete or plaster surfaces (priced and packed in quantities of 6 pieces per box). |
£158.00
|
QSC |
ADC-NC x 6 |
|
Construction bracket for installation of AD-Ci52T in concrete or other solid surfaces (priced and packed in quantities of 6 pieces per box). |
£84.00
|
QSC |
ADC-NCS x 6 |
|
Construction bracket (shallow version) for installation of AD-Ci52ST in concrete or other solid surfaces (priced and packed in quantities of 6 pieces per box). |
£120.00
|
Amina |
AF2/150 |
|
2 channel high pass active filter in plastic case with external power
supply unit. 1/4" jack input and output electrical connection. Provides
slope of 24dB per octave, set at a high pass frequency of 150Hz (-3dB @ 150Hz). |
£200.00
|
Amina |
AF2/80 |
|
2 channel high pass active filter in plastic case with external power supply unit. 1/4" jack input and output electrical connection. Provides slope of 24dB per octave, set at a high pass frequency of 80Hz (-3dB @ 80Hz). |
£200.00
|
Amina |
AIW1X |
 |
High-end invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster) perfect for low-mid level music in small to medium sized rooms; 20W single channel including APU2. Single unit.
|
£470.00
|
Amina |
AIW1Xn |
|
High-end invisible loudspeaker (designed to be skimmed over with 2mm of
normal finishing plaster) perfect for low-mid level music in small to
medium sized rooms; 20W single channel. Single unit.
|
£420.00
|
Amina |
AIW1XPair |
|
Pair of AIW1X, including an APU2. |
£890.00
|
Amina |
AIW2X |
 |
2x20W dual input "stereo" invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster) perfect for
low-mid level music in small rooms where only one speaker is required,
e.g. bathroom, dressing room. APU2 included. Priced and sold singly.
|
£630.00
|
Amina |
AIW2Xn |
|
2x20W dual input "stereo" invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster) perfect for
low-mid level music in small rooms where only one speaker is required,
e.g. bathroom, dressing room. Priced and sold singly. |
£580.00
|
Amina |
AIW350E |
 |
30W (60W Peak) invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster) perfect for mid-high level
music in small to medium sized rooms. Combine with Amina ALF40 for full
range, high quality music reproduction. APU2 included. Designed for installation with appropriate backbox. |
£675.00
|
Amina |
AIW350En |
|
30W (60W Peak) invisible loudspeaker (designed to be skimmed over with
2mm of normal finishing plaster) perfect for mid-high level
music in small to medium sized rooms. Combine with Amina ALF40 for full
range, high quality music reproduction. Designed for
installation with appropriate backbox. |
£625.00
|
Amina |
AIW350EPair |
|
Pair of AIW350E, including an APU2. |
£1,300.00
|
Amina |
AIW3X |
 |
40W single channel invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster) perfect for mid-high level music in
small to medium sized rooms. Combine with Amina ALF40 for full range,
high quality music reproduction. APU2 included. Priced and sold singly. |
£630.00
|
Amina |
AIW3X/S200 |
 |
40W single channel invisible loudspeaker (designed to be skimmed over
with 2mm of normal finishing plaster), 200mm wide, perfect for mid-high level music
in
small to medium sized rooms. Combine with Amina ALF40 for full range,
high quality music reproduction. APU2 included. Priced and sold singly. |
£630.00
|
Amina |
AIW3X/S200Pair |
|
Pair of AIW3X/S200, including an APU2. |
£1,210.00
|
Amina |
AIW3Xn |
|
40W single channel invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster) perfect for mid-high level music in small to medium sized rooms. Combine with Amina ALF40 for full range, high quality music reproduction. Priced and sold singly. |
£580.00
|
Amina |
AIW3Xn/S200 |
|
40W single channel invisible loudspeaker (designed to be skimmed over
with 2mm of normal finishing plaster), 200mm wide, perfect for mid-high level music
in
small to medium sized rooms. Combine with Amina ALF40 for full range,
high quality music reproduction. Priced and sold singly. |
£580.00
|
Amina |
AIW3XPair |
|
Pair of AIW3X, including an APU2.
|
£1,210.00
|
Amina |
AIW4X |
 |
2x40W dual input "stereo" invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster) perfect for mid
level music in all rooms where only one speaker is required, e.g.
bathroom, dressing room. APU2 included. |
£950.00
|
Amina |
AIW4Xn |
|
2x40W dual input "stereo" invisible loudspeaker (designed to be skimmed
over with 2mm of normal finishing plaster) perfect for mid
level music in all rooms where only one speaker is required, e.g.
bathroom, dressing room. |
£900.00
|
Amina |
AIW550E |
 |
50W (100W Peak) invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster) perfect for high level
music/surround sound in all rooms. Combine with a high quality active
subwoofer for high-end stereo or surround sound reproduction. APU550 included. Designed for installation with appropriate backbox. |
£1,000.00
|
Amina |
AIW550En |
|
50W (100W Peak) invisible loudspeaker (designed to be skimmed over with
2mm of normal finishing plaster) perfect for high level
music/surround sound in all rooms. Combine with a high quality active
subwoofer for high-end stereo or surround sound reproduction. Designed for installation with appropriate backbox. |
£950.00
|
Amina |
AIW550EPair |
|
Pair of AIW550E, including an APU550. |
£1,950.00
|
Amina |
AIW5X |
 |
80W invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster) perfect for high level music/surround
sound in all rooms. APU2 included. Combine with a high quality active subwoofer for
high-end stereo or surround sound reproduction. |
£950.00
|
Amina |
AIW5Xn |
|
80W invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster) perfect for high level music/surround sound in all rooms. Combine with a high quality active subwoofer for high-end stereo or surround sound reproduction. |
£900.00
|
Amina |
AIW5XPair |
|
Pair of AIW5X, including an APU2. |
£1,850.00
|
Amina |
AIW750E |
|
Twin panel 120W single channel invisible loudspeaker (designed to be skimmed over with 2mm of normal finishing plaster), including an APU750. Designed for installation with appropriate backbox. |
£1,325.00
|
Amina |
AIW750En |
|
Twin panel 120W single channel invisible loudspeaker (designed to be
skimmed over with 2mm of normal finishing plaster).
Designed for installation with appropriate backbox. |
£1,275.00
|
Amina |
ALF40 |
 |
The ALF40 Bass Enhancer has been designed to compliment the AIWX Series invisible loudspeakers. It provides additional low frequency
support and extention and integrates easily in audio installations by
virtue of it being extremely small and able to connect in parallel with
the main speakers. Its unique port design provides the necesarry
acoustic filtering to blend with the main speakers and also allows
adjustement to suit a variety of install locations - be it in-wall,
in-ceiling or free-standing. |
£250.00
|
Australian Monitor |
AM20CS |
 |
2 way 20 watt premium ceiling speaker, comes with sealed metal back can. 100V 20, 10, 5 tappings and 16 ohm transformer bypass tap, optional tile bridge available. |
£66.30
|
Australian Monitor |
AM20CSTB |
|
Ceiling tile bracket for AM20CS. |
£10.20
|
Australian Monitor |
AM60CS |
 |
2 way 60 watt premium ceiling speaker, comes with sealed metal back can. 152mm woofer & 199mm titanium horn loaded tweeter.100V - 60w, 30w, 15w tappings and 16 ohm transformer bypass tap. Tile bridge included. |
£83.30
|
Amina |
APF424EB |
|
Wall or ceiling hanging slim profile loudspeaker. Solid back to prevent dust ingress. Impedance: 8 ohms; Power: 40W rms (when 80 Hz high pass filtered @ 24dB per octave). Mitre joined silver anodised aluminium frame, keyhole wall fixings & "T" screw security fixing included. Suitable for back ground to mid ground music and voice reinforcement systems - music systems may require sub bass support. Efficiency: 88 dB 1m/1W. Max SPL 100dB, grey polyester panel surface. Panel size: 400 mm x 200mm; Product outside dimensions: 406mm x 206mm x 35mm.
Other sizes / other colours or graphics or adhesive for application of own image / external wooden frames available on request.
|
£400.00
|
Amina |
APF434WB |
 |
Wall or ceiling hanging slim profile loudspeaker. Solid back to prevent
dust ingress. Impedance: 8 ohms; Power: 40W rms (when 80 Hz high pass
filtered @ 24dB per octave). Mitre joined silver anodised aluminium
frame, keyhole wall fixings & "T" screw security fixing included.
Suitable for back ground to mid ground music and voice reinforcement
systems - music systems may require sub bass support. Efficiency: 86 dB
1m/1W. Max SPL 102dB, RAL9010 off white panel surface. Panel size: 400 mm x 300mm; Product outside dimensions: 406mm x 306mm x 35mm.
Other sizes / other colours or graphics or adhesive for application of own image / external wooden frames available on request. |
£400.00
|
Amina |
APP434W |
 |
Distributed Mode Loudspeaker for positioning on top of conventional perforated steel ceiling tiles, suitable for back ground to mid ground music and voice reproduction in any location within perforated steel suspended ceiling. Impedance: 8 ohms; Power: 40W RMS (80Hz high pass filtered @ 24dB per octave; Efficiency: 86dB 1m/1W. Panel size: 400mm x 300mm; Product outside dimensions 426mm x 326mm x 50mm. Black powder coated aluminium frame, with cloth back to stop ingress of dust etc. - black vinyl front ensuring unit is unseen from below. Extremely wide dispersion angle. |
£450.00
|
Amina |
APP554W |
 |
Suspended ceiling tile grid mounted Distributed Mode Loudspeaker, suitable for back ground to near foreground music and voice reproduction in any location within suspended ceiling. Power: 40W RMS (80Hz high pass filtered @ 24dB per octave). Efficiency: 86dB/1m/1W. Max SPL 102dB @ 1m. Silver anodised aluminium frame, with cloth back to stop ingress of dust etc, easy clean RAL 9010 white melamine finish. Panel size: 588mm x 588mm; Product outside dimensions: 594 x 594 x 35mm (matches common 600 x 600mm spacing between centre ceiling tiles). Other sizes and finishes available on request - client supplied tile patterns can be applied on the panel surface for a small extra charge. |
£430.00
|
Amina |
APU-RS8 |
 |
The APU-RS8 is an eight channel, rack mountable version of the APU2
protection unit, with Springcon ™ connectors. Ideal for multi-loudspeaker installations, the APU-RS8
fits a standard 19 inch equipment rack and is 1U high. Suitable for use with AIWX family. |
£300.00
|
Amina |
APU2 |
 |
The APU2 has been designed specifically to enhance the reliability of
AIWX Series and AIW350E loudspeakers. It features a high-pass filter and a current
sensing fuse to protect the loudspeaker from being over-driven and
potentially damaged. If the APU2 senses excessive drive current from
your amplifier, it will automatically reduce the sound level from the
speaker until the amplifier volume is reduced to a safe level. An APU2
can protect up to 2 AIWX Series loudspeakers and should be located close
to the amplifier. |
£60.00
|
Amina |
APU550 |
 |
The APU550 has been designed specifically to enhance the reliability of
Evolution Series AIW550E loudspeakers. It features a high-pass filter and a
current sensing fuse to protect the loudspeaker from being over-driven
and potentially damaged. If the APU senses excessive drive current from
your amplifier, it will automatically reduce the sound level from the
speaker until the amplifier volume is reduced to a safe level. An APU
can protect up to 2 Evolution Series loudspeakers and should be located
close to the amplifier. |
£60.00
|
Amina |
APU750 |
|
Single channel crossover and protection unit for use with AIW750E. |
£60.00
|
Audac |
AWP06 |
 |
The AWP06 is a waterproof ceiling speaker with a power of 6 Watt,
which meets the IP65 standard. It is designed to be used in a wide
variation of in- and outdoor applications and damp locations and features a 4" loudspeaker. Due
to its wide smooth frequency response and high efficiency, it ensures
high-fidelity music reproduction and intelligible speech at very low
distortion. It can be used in 8 Ohm low impedance systems, or in 100V PA
systems with power taps for 6W, 3W and 1.5W. |
£31.12
|
Amina |
BackboxFS |
 |
The BackboxFS is an easy to install, sound proofing aluminium backbox for AIWX
Series speakers. For use in plasterboard cavity walls (drywalls) or
ceilings, the BackboxFS replaces the standard loudspeaker Fixing Blocks
and creates a sealed enclosure around the back of the speaker utilising a
specially designed composite sound proofing layer. The BackboxFS is
highly recommended for multi-speaker installations - the cavity loading
the backbox provides will ensure consistent sound quality from all
speaker locations. Contains Tecsound Tec 50 and fire retardant foam. |
£70.00
|
Amina |
BackboxFS-S200 |
|
As BackboxFS, with dimensions to fit AIWX/S200. |
£70.00
|
Amina |
BackboxFSS |
 |
The BackboxFSS is an easy to install, sound proofing backbox for AIWX
Series speakers. Installed in the same way as the BackboxFS, but made
from steel, the BackboxFSS can be used in installations where a steel
back box is required to meet building fire regulations. Contains Tecsound Tec 50 and flame retardant foam.
|
£70.00
|
Amina |
BackboxSW |
 |
The BackboxSW is designed to make installation of AIWX Series
loudspeakers into solid walls or solid ceilings simple. Designed for
pre-installation, the BackboxSW is constructed from 1.2mm steel and
provides a mounting surface for the loudspeaker when fitted into a
cavity cut into a solid wall or ceiling. Installers should refer to our
guidance on sound transmission which can be found in the product
installation guide. |
£50.00
|
Audac |
CELO5 |
 |
The CELO series is AUDAC‘s first High-end Slim ceiling speaker series,
consisting of three models which can guarantee an optimal experience for
every situation and application. The CELO 5 is the smallest 5” model of
this series. |
£78.72
|
Audac |
CELO6 |
 |
The CELO 6 is the medium
6” model of the CELO series. Due to its slim grill design with very
thin border of only 1 mm and a limited grill depth which extrudes from
the ceiling surface by only 3.2 mm, these speakers will become nearly
invisible when mounted. To make them blend in even more, they can be painted in the same colour as the surrounding surface. |
£99.22
|
Audac |
CELO8 |
 |
The CELO 8 is the largest 8” model of the CELO series. Due to its
slim grill design with very thin border of only 1 mm and a limited grill
depth which extrudes from the ceiling surface by only 3.2 mm, these
speakers will become nearly invisible when mounted. To make them blend
in even more, they can be painted in the same colour as the surrounding
surface.
|
£123.00
|
KEF |
Ci 200QS Rear Enclosure |
|
Rear enclosure for Ci 200QS (RNC200S). Sold singly. |
£58.33
|
KEF |
Ci 100 QR |
 |
Uni-Q array 2-way 100mm drive unit, dedicated rear enclosure and spring clip mounting assembly |
£83.33
|
KEF |
Ci 100QR Rear Enclosure |
 |
Rear enclosure for Ci 100QR (RNC100R), sold singly. |
£41.67
|
KEF |
Ci 100QR Rough in Frame |
 |
Rough in frame for Ci 100QR (RIF100R). Priced and sold per pair. |
£25.00
|
KEF |
Ci 130CR |
 |
UTB™ Ultra Thin Bezel. Asymmetrical tweeter island for wide off-axis response. 19mm Aluminium dome tweeter and ‘tangerine’ waveguide. 130mm extended response bass driver. |
£108.33
|
KEF |
Ci 130CR/QR Rough in Frame |
|
Rough in frame for Ci 130CR & Ci 130QR (RIF130R). Priced and sold per pair. |
£16.67
|
KEF |
Ci 130QR |
 |
UTB (TM) Ultra Thin Bezel, 130mm Uni-Q driver array. 19mm aluminium dome tweeter and 'tangerine' waveguide. Cutout: 158mm. |
£141.67
|
KEF |
Ci 130QR/CR Rear Enclosure |
|
Rear enclosure for Ci 130QR & Ci 130CR (RNC130R). Sold singly. |
£54.17
|
KEF |
Ci 130QS |
|
In-wall and in ceiling speaker featuring: Ultra Thin Bezel, Uni-Q, fast
and easy installation, Tangerine Waveguide, forward woofer mounting, computer optimised trim ring, and special weather resistant grille treatments. External
dimensions (H x W X D): 127 x 127 x 76mm; Cut-out dimensions (H x W): 112 x 112mm. Net weight: 0.67kg. Mounting depth from surface: 72mm. |
£100.00
|
KEF |
Ci 130QS/CS |
|
Rough in frame for Ci 130QS & Ci 130CS (RIF130S). Priced and sold per pair. |
£16.67
|
KEF |
Ci 130QS/CS Rear Enclosure |
|
Rear enclosure for Ci 130QS & Ci130CS (RNC130S). Sold singly. |
£54.17
|
KEF |
Ci 160CL |
 |
Full range 160mm Uni-Q array flush mounted rectangular speaker with UTB for ceiling and wall installation. Cutout: 274 x 196mm. White.
|
£166.66
|
KEF |
Ci 160CR |
 |
UTB™ Ultra Thin Bezel. Asymmetrical tweeter island for wide off-axis response. 19mm Aluminium dome tweeter and ‘tangerine’ waveguide. 160mm extended response bass driver. |
£133.33
|
KEF |
Ci 160CR/QR Rear Enclosure |
|
Rear enclosure for Ci 160CR & Ci 160QR (RNC160R). Sold singly. |
£58.33
|
KEF |
Ci 160CR/QR Rough in Frame |
|
Rough in frame for Ci 160CR & Ci 160QR (RIF160R). Priced and sold per pair.
|
£20.83
|
KEF |
Ci 160CRDS |
 |
UTB™ Ultra Thin Bezel. Asymmetrical tweeter island for wide off-axis response. Dual 19mm Aluminium dome tweeters and ‘tangerine’ waveguide. For dual stereo/single speaker applications. Dual voice coil, 160mm extended response bass driver. |
£183.33
|
KEF |
Ci 160CS |
 |
Full range 160mm Uni-Q array flush mounted square speaker with UTB
for ceiling and wall installation. Cutout: 194 x 194mm. White. |
£150.00
|
KEF |
Ci 160QL |
 |
160mm Uni-Q array flush mounted rectangular speaker with UTB for ceiling and wall installation. Cutout: 274mm x 196mm. White.
|
£216.67
|
KEF |
Ci 160QR |
 |
UTB(TM) Ultra Thin Bezel, 160mm Uni-Q driver array. 19mm aluminium dome tweeter and 'tangerine' waveguide. Cutout: 196mm. |
£183.33
|
KEF |
Ci 160QS |
 |
160mm Uni-Q array flush mounted square speaker with UTB for ceiling and wall installation. Cutout: 194 x 194mm. White.
|
£200.00
|
KEF |
Ci 160QS/CS/CSDS Rear Enclosure |
|
Rear enclosure for Ci 160QS, Ci 160CS & Ci 160CSDS (RNC160S). Sold singly. |
£58.33
|
KEF |
Ci 160QS/CS/CSDS Rough in Frame |
|
Rough in frame for Ci 160QS, Ci160CS & Ci 160CSDS (RIF160S)). Priced and sold per pair. |
£20.83
|
KEF |
Ci 200.3 QT |
 |
Motorised flush mounted Uni-Q array 2-way 200mm ceiling unit, can be easily configured for infrared remote control. |
£500.00
|
KEF |
Ci 200CL |
 |
In-wall and in ceiling speaker featuring: Ultra Thin Bezel, Uni-Q, asymmetrical tweeter island, fast
and easy installation, Tangerine Waveguide, forward woofer mounting, computer optimised trim ring, and special weather resistant grille treatments. External
dimensions (H x W X D): 369 x 273 x 102mm; Cut-out dimensions (H x W):
334 x 238mm. Net weight: 2kg. Mounting depth from surface: 95.9mm. |
£216.67
|
KEF |
Ci 200CR |
 |
UTB™ Ultra Thin Bezel. Asymmetrical tweeter island for wide off-axis response. 25mm (1.0in.) Aluminium dome tweeter and ‘tangerine’ waveguide. 200mm (8.0in.) extended response bass driver. |
£183.33
|
KEF |
Ci 200CR/QR Rear Enclosure |
|
Rear enclosure for Ci 200CR & Ci 200QR (RNC200R). Sold singly. |
£58.33
|
KEF |
Ci 200CR/QR Rough in Frame |
|
Rough in frame for Ci 200CR & Ci 200QR (RIF200R). Priced and sold per pair. |
£25.00
|
KEF |
Ci 200QL |
 |
In-wall and in ceiling speaker featuring: Ultra Thin Bezel, Uni-Q, fast
and easy installation, Tangerine Waveguide, forward woofer mounting, computer optimised trim ring, gold spring terminals, and special weather resistant grille treatments. External
dimensions (H x W X D): 369 x 273 x 106mm; Cut-out dimensions (H x W):
334 x 238mm. Net weight: 2.6kg. Mounting depth from surface: 99.8mm. |
£283.33
|
KEF |
Ci 200QR |
 |
UTB(TM) Ultra Thin Bezel, 200mm Uni-Q driver array. 25mm aluminium dome tweeter and 'tangerine' waveguide. Cutout: 240mm |
£250.00
|
KEF |
Ci 200QS |
 |
In-wall and in ceiling speaker featuring: Ultra Thin Bezel, Uni-Q, fast
and easy installation, Tangerine Waveguide, forward woofer mounting, computer optimised trim ring, gold spring terminals, and special weather resistant grille treatments. External
dimensions (H x W X D): 273 x 273 x 106mm; Cut-out dimensions (H x W): 238 x 238mm. Net weight: 2.4kg. Mounting depth from surface: 99.8mm. |
£266.67
|
KEF |
Ci 200QS Rough in Frame |
|
Rough in frame for Ci 200QS (RIF200S). Priced and sold per pair. |
£25.00
|
KEF |
Ci 3-80QT |
 |
Motorised flush mounted ceiling unit with 75mm Uni-Q array and 2 x 75mm bass drivers. |
£333.33
|
KEF |
Ci 50 R |
 |
Full range 50mm speaker that blends unobtrusively with ceiling downlighters. White, brushed steel, brass or chrome. Cut out diameter 65mm. |
£41.67
|
KEF |
Ci 50R Back Can |
|
Steel back can for use with Ci50R. |
£13.33
|
KEF |
Ci 80.2QR |
 |
Uni-Q array 2-way 80mm speaker, includes rear enclosure. |
£75.00
|
KEF |
Ci 80.2QR Rear Enclosure |
|
Rear enclosure (RNC80R), sold singly. |
£37.50
|
KEF |
Ci 9000ACE |
 |
Flagship 3-way flush mounted speaker, 165mm Uni-Q array with 2 x 165mm bass drivers and ACE technology. White cloth, grey cloth and paintable grilles included. |
£1,000.00
|
KEF |
Ci130CS |
 |
Ceiling speaker, features
include: Ultra thin bezel, asymmetrical tweeter island, fast and easy
installation, tangerine waveguide, forward woofer mounting, computer
optimised trim ring, special grille treatments, complete magnetic
circuit designed to hold grille firmly in place, new mounting leg, and
bayonet shaped PCB.External dimensions (H x W x D): 184 x 184 x 83mm. Cut-out dimensions (H x W): 158 x 158mm. Mounting depth: 77.1mm. Weight: 1.35kg. |
£125.00
|
KEF |
Ci160CSDS |
 |
The KEF Ci Series Ci160CSds is a high-fidelity flush-mount speaker that
recreates stereo, and is ideal for locations where there is only room
for one speaker. Thanks to KEF’s simple and ingenious screw down
clamping system – with moisture-resistant fixings – you can place these
speakers in environments such as bathrooms or under eaves. Features include: Ultra thin bezel, asymmetrical tweeter island, fast and easy installation, tangerine waveguide, forward woofer mounting, computer optimised trim ring, special grille treatments, complete magnetic circuit designed to hold grille firmly in place, new mounting leg, and bayonet shaped PCB.
|
£200.00
|
Tannoy |
CMS110-TB |
 |
Active 600 x 600 mm ceiling subwoofer. 1 x 10" LF. 110W. Variable crossover, 80Hz high-pass output. |
£603.00
|
Tannoy |
CMS1201 Back Can |
|
The custom engineered powder coated steel back-can has been designed to cater for all
conceivable installation possibilities making the CMS 1201DC extremely versatile. The internally
dampened 79 litre (2.8 cubic feet) back-can provides exceptional LF performance on a par with
conventional wooden enclosure loudspeakers. Steel mounting lugs allow for fitting to a Unistrut
roof rail system or be hung via 4 top-mounted eye bolts. Alternatively, the design caters for a
single point hang via M10 or 3/8 UNC screwed rod. Black. |
£229.00
|
Tannoy |
CMS1201 Grille Assembly |
|
The new acoustically transparent grille assembly for the CMS 1201DC comprises of white powder
coated steel grille with rounded white plastic bevel surround, offering optimal aesthetic discretion
and utmost architectural sensitivity. This is an optional add-on for the CMS 1201DC, where the unit is being flush installed within a tiled false ceiling situation. |
£56.00
|
Tannoy |
CMS1201DC |
 |
The CMS 1201DC is a powerful state-of-the-art large format in-ceiling loudspeaker device
conceived, designed and built to complement Tannoy’s existing class-leading CMS range. From
the pioneers of point source and large format ceiling speakers the CMS 1201DC is engineered
from the ground up with superior full-range performance in mind to handle demanding distributed
sound applications such as ballrooms, shopping malls, sports halls, airports and other high ceiling installations. |
£364.00
|
Tannoy |
CMS1201DCt |
|
The CMS 1201 is available in a low insertion loss 60W line transformer-equipped version (CMS
1201DCt) for use on 70V or 100V distributed lines. Standard tappings are configurable on the
transformer before screwing driver assembly into the back can. If later adjustment to the level is
required the baffle can be hung from the can via a hinged edge, leaving both hands free to make the required adjustment. |
£392.00
|
Tannoy |
CMS12TDC-60 |
 |
12" Dual Concentric, square grille, separate metal back can, 70.7 / 100V transformer with 60 / 30 / 15 / 7.5 taps. Single. |
£1,026.00
|
Tannoy |
CMS401 Plaster Ring |
|
Plaster ring for use with CMS401 speakers. |
£17.00
|
Tannoy |
CMS401Dce |
 |
Ceiling Eyeball Dual Concentric 4" ( 100mm ) tweeter 0.75" ( 19mm ), 120W 8 ohm, transformer 70 - 100V selectable 30 / 15 / 7.5 / 3.75W, 100Hz - 50 kHz, orientable, inclinable, white, single. |
£164.00
|
Tannoy |
CMS401e |
 |
Ceiling Eyeball ICT 4" ( 100mm ), 100W 6 ohms, transformer 70 - 100V, selectable 30 / 15 / 7.5 / 3.75W, 100Hz - 50 kHz, orientable, inclinable, white, single. |
£118.00
|
Tannoy |
CMS501-PlasterRing |
|
Plaster ring for CMS501 ceiling speaker, single. |
£17.00
|
Tannoy |
CMS501BM |
 |
Low profile, small diameter ceiling speaker with 5" ICT driver, steel back can. Low impedance and 100V with 30 / 15 / 7.5 / 3.75W taps, single. Available in black or white. |
£135.00
|
Tannoy |
CMS501DC PI |
 |
Pre-install CMS501DC, same specification as CMS501DCBM, but WITHOUT steel back can ( for use with CMS501PI back can ), single. |
£151.00
|
Tannoy |
CMS501DCBM |
 |
Low profile, small diameter ceiling speaker with 5" Dual Concentric driver with steel back can. Low impedance and 100V 330 / 15 / 7.5 / 3.75W taps, single. Available in black or white. |
£197.00
|
Tannoy |
CMS501PI |
 |
Pre-install CMS501, same specification as CMS501BM but WITHOUT back can ( for use with CMS501PI back can ). Single. |
£86.00
|
Tannoy |
CMS501PI-BackCan |
|
CMS501 steel back can for use with CMS501-PI and CMS501DC-PI, single. |
£63.00
|
Tannoy |
CMS601-PlasterRing |
|
Plaster ring for CMS601 ceiling speaker, single. |
£18.00
|
Tannoy |
CMS601BM |
 |
Low profile, small diameter 6.5" ceiling speaker with ICT driver, steel back can. Low impedance and 100V with 30 / 15 / 7.5W taps, single. Available in black or white. |
£204.00
|
Tannoy |
CMS601DC PI |
 |
Pre-install CMS601DC, same specification as CMS601DCBM but WITHOUT steel back can ( for use with CMS601PI back can ). Low impedance with facility for 100V with 60 / 30 / 15W taps, transformer NOT included. Available as an accessory or fitted to back can, sold singly. |
£219.00
|
Tannoy |
CMS601DCBM |
 |
Low profile, small diameter 6" ceiling speaker, Dual Concentric driver with steel back can. Low impedance and 100V with 60 / 30 / 15W taps, single. Available in black or white. |
£278.00
|
Tannoy |
CMS601DCPI BackCan |
|
CMS601 steel back can for use with CMS601DC-PI complete with 60W transformer, single. |
£76.00
|
Tannoy |
CMS601PI |
 |
Pre-install CMS601, same specification as CMS601BM but WITHOUT steel back can ( for use with CMS601PI back can ). Low impedance with facility for 100V with 30 / 15 / 7.5W taps. Transformer not included. Available as an accessory or fitted to back can, sold singly. |
£159.00
|
Tannoy |
CMS601PI BackCan |
|
CMS601 steel back can for use with CMS601-PI, complete with 30W transformer, single. |
£76.00
|
Tannoy |
CMS801 PlasterRing |
|
Plaster ring for CMS801 ceiling speaker, single. |
£23.00
|
Tannoy |
CMS801BM Sub |
 |
Compact 8" blind mount ceiling subwoofer with integral back can, designed to compliment the
CMS / CVS range. 160Hz Passive crossover built-in. 60W 70V(US)-100V(UK/EU) transformer with 15M/30W/60W tappings. Single. |
£333.00
|
Tannoy |
CMS801DC PI |
 |
Pre-install CMS801DC, 200mm 8" Dual Concentric driver, WITHOUT steel back can ( for use with CMS801PI back can 0 .Low impedance with facility for 100V with 60 / 30 / 15W taps - transformer NOT included. Available as an accessory or fitted to back can, sold singly. |
£307.00
|
Tannoy |
CMS801DCBM |
 |
200mm 8" ceiling speaker, Dual Concentric driver with steel back can. Low impedance and 100V with 60 / 30 / 15W taps. Smallest footprint large format ceiling speaker on the market! Single. |
£419.00
|
Tannoy |
CMS801PI BackCan |
|
CMS801 steel back can for use with CMS801PI, complete with 60W transformer, single. |
£128.00
|
Tannoy |
CMS801Pi Sub |
 |
Compact 8" pre-install ceiling subwoofer, designed to compliment the CMS / CVS range. 160Hz
Passive crossover built-in. Separate CMS801 back can option available. Single. |
£267.00
|
Quad Industrial |
Concourse C4 |
 |
Round 2-way speaker, 4 "LF 1" soft dome tweeter, 25w continuous, 50w program, 100w peak, selectable 4 or 16 ohm, integral 30/15/7.5/3.75 watt tap line transformer. Back box and tile rails included. Priced per pair. |
£186.00
|
Quad Industrial |
Concourse C6 |
 |
Round 2-way speaker, 6"LF 1" dome tweeter, 50w continuous, 100w program, 200w peak, selectable 4 or 16 ohm, 60/30/15/7.5W 70/100v line transformer, "C" ring, back box inc tile rails. Priced per pair. |
£238.00
|
Quad Industrial |
Concourse C8 |
 |
Round 2-way speaker, 8"LF 1" soft dome tweeter and passive crossover, 75w continuous, 150w program, 300w peak, selectable 4 or 16 ohm inc 60/30/15/7.5w @ 70/100v line transformer, "C" ring, back box inc tile rails. Priced per pair. |
£292.00
|
Quad Industrial |
Concourse CE-4F |
 |
As CE-4 but with metal back box for extended bass response and added safety cable point, spring loaded mounting clips for fast and simple installation. 120-16kHz, 86dB @im/1W, 70/100V @ 10W/5W/2.5W power taps. Priced and sold as box of 6. |
£197.00
|
Quad Industrial |
Concourse CE-6F |
 |
Two way ported round ceiling loudspeaker with 6" woofer, 1" soft dome tweeter;
Frequency Response: 90-20kHz;
86dB sensitivity @ 1m/1W
; 20W/10W/5W/2.5W Power Taps @ 70 volts; 20W/10W/5W Power Taps @ 100 volts
; Metal back box construction; Wide dispersion.
Priced and packed in boxes of six. |
£277.00
|
Quad Industrial |
Concourse CM4-16 |
|
Compact 2-way 4" LF, 1" soft dome tweeter, passive crossover, 50 watts program, 16 0hm. Shorter back box, tile rails included. Priced per pair. |
£131.00
|
Quad Industrial |
Concourse CM4-T |
|
Compact 2-way ceiling speaker, 4" LF, 1" soft dome tweeter, passive crossover, 50w program, 30W 70/100V line transformer. Shorter back box, tile rails included. Priced per pair. |
£168.00
|
Quad Industrial |
Concourse CSUB |
 |
Round speaker, sub bass reflex, 10" long throw bass driver and passive low pass filter, 100w continuous, 200w program, 400w peak, dual 8 ohm coils allow for 4 ohm or 16 ohm impedence setting. Integral 60/30/15/7.5w line transformer, back box, tile rails included. Priced per pair. |
£269.00
|
JBL |
Control 19 CS |
 |
8" in-ceiling subwoofer. Nested chamber design. Linear aperture port. 42Hz-200Hz. 200W program, 100W pink noise capacity. SonicGuard overload protection. With backcan, support plate and rails.
Sold and priced as pairs. |
£500.00
|
JBL |
Control 19 CST |
|
As Control 19 CS with transformer for 70V or 100V line. Taps at 60W, 30W and 15W. No SonicGuard.
Priced and sold as pairs. |
£550.00
|
JBL |
Control 226 C/T |
 |
6.5" coax ceiling speaker. 120° coverage. 150W. 47Hz-19kHz freqemcy response. 90dB sensitivity. 1" exit compression driver. 8 ohms plus 70/100V transformer with taps at 60W, 30W and 15W. 13" rounded ported baffle.
Priced and sold as pairs. |
£720.00
|
JBL |
Control 227C |
 |
6.5" coax ceiling speaker with HF driver. 120° coverage. 150W power handling. Coaxial design with kevlar reinforced 6.5" woofer and 1" compression driver. Extraordinary clarity for speech and vocals. Integrated backcan with clean contemporary grille sold separately.
Priced and sold as pairs. |
£570.00
|
JBL |
Control 227CT |
 |
As Control 227C with 70/100V transformer with 60W tap. |
£650.00
|
JBL |
Control 24 CT Micro+ |
 |
Complete assembly with backcan, grille, support plate and tile rails. 70/100V transformer taps at 25W amd 12.5W. 150° coverage. 100mm depth.
Priced and sold as pairs. |
£260.00
|
JBL |
Control 24C |
 |
4" two-way vented ceiling speaker. 80Hz-20kHz, 86dB sensitivity. 80W program, 40W pink noise capacity. SonicGuard overload protection. 130° coverage. With backcan, grille, support plate and tile rails. Priced and sold as pairs. |
£260.00
|
JBL |
Control 24C Micro |
 |
4" two-way ceiling speaker. 30W program, 15W pink noise capacity. 150° coverage. With backcan, grille, support plate and tile rails.
For applications with low Micro ceilings or those not requiring high SPL levels.
Priced and sold as pairs. |
£170.00
|
JBL |
Control 24CT |
|
As Control 24C with transformer for 70V or 100V line. Taps at 30W, 15W and 7.5W.
Available in black or white.
Priced and sold as pairs. |
£280.00
|
JBL |
Control 24CT Micro |
|
As Control 24C Micro with transformer for 70V or 100V line. Taps at 8W, 4W, 2W and 1W.
Priced and sold as pairs. |
£180.00
|
JBL |
Control 26 DT |
 |
Compact ceiling speaker assembly configured to install into standard ceiling backcans designed for 8" drivers. Coaxial woofer with long-life butyl rubber surround and titanium coated tweeter. 70/100V transformer with taps at 60W, 30W and 15W.
Priced and sold as pairs. |
£240.00
|
JBL |
Control 26C |
|
6.5" two-way ceiling speaker. 75Hz-20kHz, 89dB sensitivity. 150W program, 75W pink noise capacity. SonicGuard overload protection. 16 ohms. With backcan, grille, support plate and tile rails.
Priced and sold as pairs. |
£330.00
|
JBL |
Control 26CT |
|
As Control 26C with transformer for 70V or 100V line. Taps at 60W, 30W and 15W. No SonicGuard.
Priced and sold as pairs. |
£370.00
|
JBL |
Control 312CS |
 |
12" ceiling subwoofer. 400W power handling. 30Hz-4.5kHz frequency response. 92dB sensitivity. 14.3" square ported baffle, 9" deep. EZ-Rail for ease of installation. |
£525.00
|
JBL |
Control 321C |
 |
12" premium coax ceiling speaker. 90° coverage. 250W power handling. 34Hz-18kHz frequency response. 94dB sensitivity. 2124H compression driver. 14.3" square ported baffle, 9" deep. EZ-Rail for ease installation. |
£420.00
|
JBL |
Control 321CT |
|
As the Control 321C with 70/100V multi-tap transformer. Taps at 60W, 30W and 15W (plus 7.5W at 70V only). |
£465.00
|
JBL |
Control 322C |
 |
12" ceiling speaker with medium format compression driver. 90° coverage. 400W power handling. 32Hz-20kHz frequency response. 95dB sensitivity. 2407H compression driver. 14.3" square ported baffle, 9" deep. EZ-Rail for ease of installation. |
£615.00
|
JBL |
Control 322CT |
|
As the Control 322CT with 70/100V multi-tap transformer. Taps at 100W, 50W and 25W (plus 12.5W at 70V only). |
£665.00
|
JBL |
Control 328C |
 |
8" coax ceiling speaker with 12" waveguide. 100° coverage. 250W power handling. 45Hz-18kHz frequency response. 93dB sensitivity. 2412H compression driver. 11.8" rounded ported baffle/ waveguide, 6.4" deep. |
£340.00
|
JBL |
Control 328CT |
|
As the Control 328C with 70/100V multi-tap transformer. Taps at 60W, 30W and 15W (plus 7.5W at 70V only). Depth 8.8". |
£385.00
|
JBL |
Control 40 CS/T |
 |
Direct radiating in-ceiling subwoofer. Long throw 8" driver. 30Hz-280Hz. 200W program, 100W pink noise capacity. 70/100V transformer with taps at 60W, 30W and 15W. Built-in crossover network with outputs for 2 or 4 Control 42C satelite speakers.
Priced and sold as pairs. |
£760.00
|
JBL |
Control 42C |
 |
Ultra-compact satelite speaker for use with Control 40 CS/T subwoofer. 160Hz-20kHz. 82dB sensitivity. 30W program, 15W pink noise. C-ring and tile-rails optional.
Priced and sold as pairs. |
£160.00
|
JBL |
Control 47C/T |
 |
Wide coverage, extended bass ceiling speaker featuring conical RBI technology. 6.5" two-way. 120° consistent coverage. 50Hz-20kHz, 150W program and 75W pink noise capacity. 70/100V taps at 60W, 30W and 15W.
Priced and sold as pairs. |
£540.00
|
JBL |
Control 47HC |
 |
High ceiling, narrow coverage speaker featuring conical RBI technology. Specs as Control 47 C/T but with 75° coverage. 55Hz-20kHz.
Priced and sold as pairs. |
£650.00
|
JBL |
Control 47LP |
 |
As 47 C/T with a low profile at 142mm deep. 68Hz-20kHz.
Priced and sold as pairs. |
£470.00
|
Monitor Audio |
CPC120 |
 |
80 mm diameter ceiling speaker with 1 x 2" full range micro-driver, steel bezel, aluminium CP enclosure, and gold plated 'push' type terminals. Its precision engineered micro-design allows it to offer a surprisingly
coherent and detailed performance from a standard halogen down-lighter
hole. Features include: Quick and easy discreet flush-fitment to walls or ceilings; CP (Controlled Performance) rear enclosures for improved sonic consistency regardless of
interior wall or ceiling construction; Conventional fitment clips offer quick and simple installation. Available in brushed steel, white, chrome or brass finishes. Priced and sold per pair.
|
£104.17
|
Audac |
CS1000S |
 |
The CS1000S is a 10” in-wall/ceiling subwoofer speaker with a super slim design. The
built-in depth of merely 104 mm makes the CS1000S fit into almost every
wall or ceiling, and it can be painted in any desired colour to blend
in with the environment the speaker is used in. |
£86.10
|
Audac |
CS2.1 |
 |
The uniquely designed CUBAN loudspeakers are flush-mounted In-Ceiling or
In-Wall speakers, which provide high quality, wide-dispersion with a
high efficiency while remaining as discreet as possible. They answer to
the need with its ability of generating a great sound with very little
power. In fact, the Cuban speakers can generate a sound from solid
surfaces by utilizing only 3 to 25 Watts. A built-in self resetting
protection circuit guarantees a long lifetime without any loss of
quality and power. |
£34.44
|
Audac |
CS3.1 |
 |
The CS3.1 Cuban Speaker features a 3 1/8" full range loudspeaker with a
shielded neodymium magnet, which is capable of producing up to 20 W RMS,
with a maximum of 40W. The standard speaker impedance is 8 Ohm, but
through an additional 100V Line transformer, it also can be used on 100V
PA systems. |
£39.36
|
Audac |
CS3.1W |
 |
As CS3.1 but in white finish.
|
£36.90
|
Audac |
CS3.2 |
 |
The CS3.2 Cuban Speaker features a 1" soft dome tweeter and a 3 1/8"
full range loudspeaker with a shielded neodymium magnet, which is
capable of producing up to 20 W RMS, with a maximum of 40W. The standard
speaker impedance is 8 Ohm, but through an additional 100V Line
transformer, it also can be used on 100V PA systems. |
£54.12
|
Audac |
CS55 |
 |
The CS series are elegant ceiling loudspeakers, designed for use in any
possible application where is need for a sound system without obvious
speakers. They are made of high quality components, to ensure a
beautiful warm sound reproduction of music and speech. Furthermore, they
all have an integrated 100V line transformer with several power
tapping’s, whereby they can be used in standard low impedance Hi-Fi or
larger 100V PA systems. The cone is moisture-proof treated, so they can
be used in damp rooms and outside applications, the grill and housing
can also be painted to integrate seamlessly into your interior.White. |
£19.31
|
Audac |
CS55/B |
 |
As CS55, but in black. |
£19.68
|
Audac |
CS55/D |
|
The CS55
is a professional single cone loudspeaker with a 4 1/3" driver which is
capable of producing a power up to 10W RMS, with a maximum of 20W. It ensures a good reproduction of speech and background music in all situations. The
/D version is the 16 Ohm variant of the CS55 speaker, providing the
additional advantage for connecting a larger number of speakers in
parallel to a low impedance audio system. White.
|
£15.50
|
Audac |
CS58 |
|
Ceiling speaker with fire protection, 6W / 1000V. |
£28.70
|
Audac |
CS624 |
 |
The CS624 is a high quality ceiling speaker for installation purposes
with a power of 60 Watt. It consists of a 2-Way loudspeaker unit
existing of a 6.5” LF loudspeaker unit, combined with an 1” dome tweeter
providing premium performance in background, foreground and
music-paging sound systems. |
£110.70
|
Audac |
CS74 |
|
The CS74 is a 2-way high quality loudspeaker with a 5" driver for the
low frequencies, and 1" coaxial tweeter mounted in the centre. It is
capable of producing up to 30W RMS, with a maximum of 60W. It
ensures a brilliant reproduction of all kinds of music, and is fitted
with a 100V line transformer.There are different power taps available
for 6W, 3W and 1.5W at 100V. It is fitted with a 6 Watt transformer. Available in black or white.
|
£36.29
|
Audac |
CS75 |
 |
The CS75 is a 2-way high quality loudspeaker with a 5" driver for the
low frequencies, and 1" coaxial tweeter mounted in the centre. It is
capable of producing up to 30W RMS, with a maximum of 60W. It ensures a brilliant reproduction of all kinds of music, and is fitted with a 100V line transformer. There are different power taps available for 24W, 12W and 6W at 100V. White.
|
£40.18
|
Audac |
CS75/B |
 |
As CS75 but black. |
£39.98
|
Audac |
CS75/D |
|
The CS75 is a 2-way high quality loudspeaker with a 5" driver for the
low frequencies, and 1" coaxial tweeter mounted in the centre. It is
capable of producing up to 30W RMS, with a maximum of 60W. It ensures a brilliant reproduction of all kinds of music. The
/D version is the 16 Ohm variant of the CS75 speaker, providing the
additional advantage for connecting a larger number of speakers in
parallel to a low impedance audio system. White.
|
£37.52
|
Audac |
CS85 |
 |
The CS85 is a 2-way extremely high quality loudspeaker with a 8" driver
for the low frequencies, and 1" coaxial tweeter mounted in the centre.
It is capable of producing up to 40W RMS, with a maximum of 80W. Available in black or white. |
£45.92
|
Audac |
CS85/D |
|
The CS85/D is the 16 Ohm variant of the CS85 speaker, providing the
additional advantage for connecting a larger number of speakers in
parallel to a low impedance audio system. White. |
£44.28
|
Audac |
CSA506 |
 |
The CSA506 is a budget friendly ceiling speaker with a 5" cone, capable
of producing a power of 6W. It ensures a good reproduction of speech and
background music. It is fitted with a 100V line transformer with power
taps for 6W and 3W to be used in large 100V PA systems. White. |
£12.79
|
Audac |
CSE100 |
 |
The CSE100 is the red LED unit which is integrated in the CSE55
speaker,and can also be ordered separately, to use as visual alarm
system in other applications. It works on a supply voltage of 24V DC,
and has a current consumption of 45 mA. The light intensity is 24 lumen
and it has a radiation angle of 120°. |
£22.14
|
Audac |
CSE55 |
 |
The CSE55 is a professional ceiling speaker with an integrated RED LED unit which can be used as visible alarm signal. It
features a 4 1/3" single cone loudspeaker which is capable of producing
up to 10W RMS, with a maximum of 20W, and it ensures good reproduction
of speech and background music in all situations. The speaker is fitted
with a 100V line transformer and there are different power taps
available for 6W, 3W and 1.5W at 100V. The integrated LED unit deliver a light intensity of 24 Lumen on a supply voltage of 24V DC. |
£43.05
|
Audac |
CSF506MKII |
 |
The CSF506MKII is a fire-protected ceiling speaker with a 5" cone,
capable of producing a power of 6W. It ensures a good reproduction of
speech and background music. It is fitted with a 100V line transformer
with power taps for 6W and 3W to be used in large 100V PA systems. The
speaker is equipped with a special steel fire protection dome fitted
around the speaker and a steel front grill with flame retardant
materials. This provides the fire protection according to the EN60849
standard. |
£36.90
|
Audac |
CSW55 |
 |
The CSW55 is a professional ceiling speaker with an integrated WHITE LED unit which can be used as visible alarm signal. It
features a 4 1/3" single cone loudspeaker which is capable of producing
up to 10W RMS, with a maximum of 20W, and it ensures good reproduction
of speech and background music in all situations. The speaker is fitted
with a 100V line transformer and there are different power taps
available for 6W, 3W and 1.5W at 100V. The integrated White unit deliver a light intensity of 24 Lumen on a supply voltage of 24V DC. |
£43.05
|
Monitor Audio |
CT165 |
 |
2 way in-ceiling speaker, 1" pivoting Gold Dome C-CAM tweeter, 6 1/2" MMP II base driver, high frequency attenuation switch, 3 position tri-grip clamping system. Overall diameter: 9 13/16"; Cutout diameter: 8 5/16"; Mounting depth: 4 7/16". Construction bracket (CB-6) included.
|
£87.50
|
Monitor Audio |
CT165-T2 |
 |
In-ceiling speaker for single speaker applications. Dual 1" pivoting Gold Dome C-CAM tweeters, 6 1/2"
MMP II dual-wound voice-coil base driver, 3 position
tri-grip clamping system. Overall diameter: 9 13/16"; Cutout diameter: 8
5/16"; Mounting depth: 4 7/16".
Construction bracket (CB-6) included. |
£112.50
|
Monitor Audio |
CT180 |
 |
2 way in-ceiling speaker, 1" pivoting Gold Dome C-CAM tweeter, 8"
MMP II base driver, high frequency attenuation switch, 3 position
tri-grip clamping system. Overall diameter: 11 1/4"; Cutout diameter: 9 3/4"; Mounting depth: 4 3/4".
Construction bracket (CB-8) included. |
£112.50
|
Monitor Audio |
CT180-T2 |
 |
In-ceiling speaker for single speaker applications. Dual 1" pivoting Gold Dome C-CAM tweeters, 8"
MMP II dual-wound voice-coil base driver, 3 position
tri-grip clamping system. Overall diameter: 11 1/4"; Cutout diameter: 9 3/4"; Mounting depth: 4 3/4".
Construction bracket (CB-8) included. |
£141.67
|
Monitor Audio |
CT265 |
 |
2 way in-ceiling speaker, 1" pivoting Gold Dome C-CAM tweeter, 6 1/2" C-CAM bass driver, high frequency and boundary compensation controls, 3 position tri-grip clamping system. Overall diameter: 9 13/16"; Cut-out diameter: 8 5/16"; Mounting depth: 4 7/16". Construction bracket (CB-6) included. |
£129.17
|
Monitor Audio |
CT265-FX |
 |
1" fixed angle Gold Dome C-CAM tweeter, 6 1/2" C-CAM cone bass driver, high frequency attenuation switch, 3 position tri-grip clamping system. Overall diameter: 9 13/16"; Cut-out diameter: 8 15/16"; Mounting depth: 5 7/8". Construction bracket (CB-6) included. |
£150.00
|
Monitor Audio |
CT265-IDC |
 |
In-ceiling speaker with 1"GoldDome C-CAM tweeters, 6 1/2" C-CAM cone bass driver, 4" C-CAM inverted mid-range driver (IDC), high frequency and boundary compensation controls, 3 position tri-grip clamping system. Overall diameter: 11 1/4", cut-out diameter: 9 3/4", mounting depth: 6 1/16". Construction bracket (CB-6) included. |
£179.17
|
Monitor Audio |
CT280 |
 |
2 way in-ceiling speaker, 1" pivoting Gold Dome C-CAM tweeter, 8" C-CAM cone bass driver, high frequency and boundary compensation controls, 3 position tri-grip clamping system. Overall diameter: 11 1/4"; Cut-out diameter: 9 3/4"; Mounting depth: 4 11/16". Construction bracket (CB-8) included. |
£154.17
|
Monitor Audio |
CT280-IDC |
 |
Ceiling speaker with 1" Gold Dome C-CAM tweeters, 8" C-CAM cone bass driver, 4" C-CAM inverted mid-range driver (IDC), 3 position tri-grip clamping system. Overall diameter: 11 1/4"; Cut-out diameter: 9 3/4"; Mounting depth: 6 1/16". Construction bracket (CB-8) included. |
£204.17
|
Monitor Audio |
CT380-FX |
 |
Ceiling speaker with 1" fixed angle Gold Dome C-CAM tweeter, 8" C-CAM bass driver featuring RST, high frequency switch, 3 position tri-grip claping system. Overall diameter: 11 1/4"; Cut-out diameter: 6 5/16"; Mounting depth: 6 3/16". Construction bracket (CB-8) included. |
£225.00
|
Monitor Audio |
CT380-IDC |
 |
Ceiling speaker with 1" Gold Dome C-CAM tweeter, 8" C-CAM bass driver featuring RST, dual concentric IDC housing, 4" C-CAM RST inverted mid-range driver, high frequency and boundary compensation controls, 3 position tri-grip clamping system. Overall diameter 11 1/4"; Cut-out diameter: 9 3/4"; Mounting depth: 6 3/16". Construction bracket (CB-8) included. |
£262.50
|
Tannoy |
CVS4 |
 |
Coaxial speaker 4" ( 100mm ), 80W 6 ohms, transformer 70 - 100V selectable 30 / 15 / 7.5W, 85Hz - 19kHz, 87dB, white, paintable metal grille, single. |
£77.00
|
Tannoy |
CVS4 Plaster Ring |
|
Plaster ring for use with CVS4 speakers. |
£17.00
|
Tannoy |
CVS4Micro |
 |
Ultra low profile coaxial speaker 4" ( 100mm ), 80W 6 ohms, depth 99mm, transformer 70 - 100V selectable 30 / 15 / 7.5W, 85Hz - 19kHz, 87dB, white, paintable metal grille, single. |
£72.00
|
Tannoy |
CVS6 |
 |
Coaxial speaker 6" ( 150mm ), 120W 8 ohms, transformer 70 - 100V selectable 60 / 30 / 15W, 79Hz - 21kHz, 91dB, white, paintable metal grille, single. |
£111.00
|
Tannoy |
CVS6 Plaster Ring |
|
Plaster ring for use with CVS6 speakers. |
£18.00
|
Tannoy |
CVS8 |
 |
The Tannoy CVS 8 is a full bandwidth large-format in-ceiling speaker system of class-leading
performance and exceptional value. The design comprises a 200mm (8.00”) mid bass driver with a
coaxially mounted 19mm (0.75”) high frequency section mounted in a vented, injection moulded,
paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. |
£163.00
|
Tannoy |
CVS8 Plaster Ring |
|
Optional plaster (mud) ring, designed to be installed into newly constructed, non-suspended ceilings. |
£21.00
|
Monitor Audio |
CWT140 |
 |
Trimless in-ceiling speaker with 1 x 1" C-CAM gold dome tweeter, 1 x 4" MMPII cone bass driver, 3 position tri-grip dog fixings. Available with either square or round grille. Overall size: 6 15/16 x 6 15/16"; Cut-out diameter: 5 7/8"; Depth: 3 7/8". Construction bracket CB-4 included. Sold singly.
|
£87.50
|
Monitor Audio |
CWT160 |
 |
Trimless in-ceiling speaker with 1 x 1" C-CAM gold dome tweeter, 1 x 6" MMPII cone bass driver, 3 position tri-grip dog fixings. Available
with either square or round grille. Overall size: 7 13/16 x 7 13/16";
Cut-out diameter: 6 11/16"; Depth: 3 7/8". Construction bracket CB-5
included. Sold singly.
|
£108.33
|
Monitor Audio |
CWT180 |
 |
Trimless in-ceiling speaker with 1 x 1" C-CAM gold dome tweeter, 1 x 8" MMPII cone bass driver, 3 position tri-grip dog fixings. Available
with either square or round grille. Overall size: 9 11/16 x 9 11/16";
Cut-out diameter: 8 3/8"; Depth: 3 15/16". Construction bracket CB-6
included. Sold singly. |
£133.33
|
Ecler |
ECL106I |
 |
One way affordable 6" transducer, 6W (low impedance) and 100V taps (0.75, 1.5, 3, 6W), Max SPL 101dB, Sensibility (1W/1m) 93 dB. |
£49.00
|
Ecler |
ECL106IFR |
 |
As ECL106I but fire rated to obey BS 5839-8, with ceramic connector, thermal fuse, & fireproof backcan. |
£69.00
|
AMC |
Evac 6 |
 |
2-way ceiling speaker, 6", metal, with orange steel fire housing, white metal grille, quick fit and built in line transformer. 100V/10W-5W-2.5W, 150Hz - 20 kHz. Sold singly. |
£49.00
|
Electrovoice |
EVID C10.1 |
 |
Evid 10" ceiling mount subwoofer, 100w/8ohm, 100v taps are 7.5w, 15w, 30w and 60w, white, priced per pair. |
£428.00
|
Electrovoice |
EVID C12.2 |
|
12" coax ceiling speakers, 100W @ 8 ohms, 100V with 7.5/15/30/60W taps, white, each. |
£446.00
|
Electrovoice |
EVID C4.2 |
 |
Evid 4" coax 2 way speaker, 75w/8ohm, 100v taps are 3.75w, 7.5w, 15w and 30w, 130 degrees, white, priced per pair. |
£239.00
|
Electrovoice |
EVID C8.2 |
 |
Evid 8" coax 2 way speaker, 100w/8ohm, 100v taps are 3.75w, 7.5w, 15w and 30w, 110 degrees, white, priced per pair. |
£297.00
|
Electrovoice |
EVID C8.2HC |
 |
Evid 8" coax 2 way speaker, 100w/8ohm, 100v taps are 7.5w, 15w, 30w and 60w, 75 degrees, white, priced per pair. |
£416.00
|
Electrovoice |
EVID C8.2LP |
 |
Lower profile version of EVID C8.2 (178mm instead of 255mm), white, priced per pair. |
£297.00
|
Amina |
HDWB |
|
Single heavy duty wall bracket to fit to rear of ACPT544E. |
£75.00
|
Ecler |
IC 5 |
 |
2-way ceiling speaker, 5" woofer plus 13mm coaxial soft dome tweeter, low and high impedance (4 power tapping selection + 30W/8 ohms), easily paintable. Priced and sold per pair. |
£98.00
|
Ecler |
IC 6 |
 |
2-way ceiling speaker, 6.5" woofer plus 1" coaxial soft dome tweeter, low and high impedance (4 power tapping selection + 40W/8 ohms), easily paintable. Priced and sold per pair. |
£118.00
|
Ecler |
IC 8 |
 |
2-way ceiling speaker, 8" woofer plus 1" coaxial soft dome tweeter, low and high impedance (4 power tapping selection + 60W/8 ohms), easily paintable. Priced and sold per pair. |
£150.00
|
Ecler |
IC6 PLC |
|
IC6 Plus with back can. |
£190.00
|
Ecler |
IC6 PLF |
|
IC6Plus & back can & 100V line transformer. |
£213.04
|
Ecler |
IC6PLUSTR |
 |
100 V line transformer adaptor for the IC6PLUS ceiling speaker. |
£36.00
|
Ecler |
IC8 PLC |
|
2 way speaker. 8" neodynium magnet woofer built in Kevlar-NBR material + 1" adjustable (pan-tilt) tweeter built in "super-silk" ACCW material. 4 mechanical bodies light weight structure which allows for fast, easy installation (spin gesture + lock clip). 100W RMS. Back can included. Optional 100V line transformer. |
£229.00
|
Ecler |
IC8 PLF |
|
IC8Plus & back can & 100V line transformer. |
£258.11
|
Ecler |
IC8PLUSTR |
|
100V line transformer adaptor for the IC8PLUS ceiling speaker. |
£47.50
|
Ecler |
ICSB10L |
 |
In-ceiling 10" subwoofer unit. 100W RMS @ 8 ohms. Priced and sold per pair. |
£438.00
|
Phonic |
IW10060 |
 |
10" subwoofer in-ceiling speaker, 15/30/60W, 100V, 94dB SPL. |
£179.00
|
Phonic |
IW4030 |
 |
4" High Fidelity in-ceiling speaker, 1.5" tweeter, 5/15/20/30W, 100V, 92dB, SPL. |
£33.00
|
Phonic |
IW506 |
 |
5" coax, 100V, 6W max tap, 150Hz - 12KHz |
£21.00
|
Phonic |
IW6510 |
 |
6.5" coax, 70/100V, 10W max tap. |
£37.00
|
Phonic |
IW6530 |
 |
6.5" High Fidelity in-ceiling speaker, 1" tweeter, 5/10/15/30W, 8 ohms, 100V, 92dB SPL. |
£79.00
|
AMC |
MC4TA |
 |
2-way ceiling speaker, metal, 4", with metal grille, quick fit and built in line transformer, 100V/6W, 110Hz - 15kHz, sold singly. |
£15.00
|
Amina |
Mounting Blocks |
|
4 plastic mounting blocks for use with AIWX family where no backbox is used. |
£15.00
|
JBL |
MTC-200BB6 |
 |
Cylindrical backcan for Control 227 C & C/T. 16 guage metal construction lined with 12mm MDF. |
£65.00
|
JBL |
MTC-24MR |
|
Mud plaster ring brackets for Control 24C. |
£135.00
|
JBL |
MTC-24NC |
|
New construction brackets for Control 24C. |
£100.00
|
JBL |
MTC-24TR |
|
Trim ring for retrofit in 250mm cutouts for Control 24C. |
£145.00
|
JBL |
MTC-26MR |
|
Mud plaster ring bracket for Control 26C. |
£165.00
|
JBL |
MTC-26NC |
|
New construction brackets for Control 26C. |
£115.00
|
JBL |
MTC-26TR |
|
Trim ring for retrofit in250mm cutouts for Control 26C. |
£145.00
|
JBL |
MTC-300BB12 |
 |
Backcan for 12" models. 16 guage metal construction lined with heavy duty MDF. 23" x 18" x 12.8". |
£230.00
|
JBL |
MTC-300BB8 |
 |
Backcan for Control 328. 16 guage metal construction lined with heavy duty MDF. 16" diameter x 10.6" deep. |
£80.00
|
JBL |
MTC-300SG12 |
 |
Square white metal grille for 12" models. |
£35.00
|
JBL |
MTC-300T150 |
 |
Optional 150W transformer for 227C. |
£75.00
|
JBL |
MTC-81BB8 |
 |
Pre-install backcan for 8138. 7.4 litre volume.
Priced and sold as packages of four. |
£140.00
|
JBL |
MTC-81TB8 |
 |
Tile bridge for 8138. 19 guage steel with e-coated finish.
Priced and sold as packages of four. |
£60.00
|
JBL |
MTC-RG6/8 |
 |
Round grille. |
£25.00
|
JBL |
MTC-TB6/8 |
 |
Tile bridge for suspended ceiling install. |
£25.00
|
JBL |
MTC19-MR |
|
Mud plaster ring brackets for Control 19 CS. |
£235.00
|
JBL |
MTC19-NC |
|
New construction brackets for Control 19 CS. |
£165.00
|
Yamaha |
NSIC400 |
 |
In-ceiling speakers, features include: Blue PP mica cone woofer;
Fluid-cooled soft-dome swivel tweeter; 90W high power handling
capacity; Horn-shaped acoustic baffle with spiral pattern produces a
clean and natural sound; Thin grille with slim edge becomes almost
invisible after installation; Protective plastic cover on the back;
Light grill with magnetic catch is easy to attach and remove for spray
painting and cleaning; Large dog-eared clamp with non-slip tread for
sure installation. Priced and sold per pair. |
£83.29
|
Yamaha |
NSIC600 |
 |
In-ceiling speakers, features include: Blue PP mica cone woofer;
Fluid-cooled soft-dome swivel tweeter; 110W high power handling
capacity; Horn-shaped acoustic baffle with spiral pattern produces a
clean and natural sound; Thin grille with slim edge becomes almost
invisible after installation; Protective plastic cover on the back;
Light grill with magnetic catch is easy to attach and remove for spray
painting and cleaning; Large dog-eared clamp with non-slip tread for
sure installation. Priced and sold per pair. |
£108.29
|
Yamaha |
NSIC800 |
 |
In-ceiling speakers, features include: Blue PP mica cone woofer; Fluid-cooled soft-dome swivel tweeter; 140W high power handling capacity; Horn-shaped acoustic baffle with spiral pattern produces a clean and natural sound; Thin grille with slim edge becomes almost invisible after installation; Protective plastic cover on the back; Light grill with magnetic catch is easy to attach and remove for spray painting and cleaning; Large dog-eared clamp with non-slip tread for sure installation. Priced and sold per pair.
|
£149.96
|
Yamaha |
NSICS600 |
 |
Stereo in-ceiling speaker, features include: Blue PP mica cone woofer; Fluid-cooled soft-dome swivel tweeter; 120W high power handling capacity; Horn-shaped acoustic baffle with spiral pattern produces a clean and natural sound; Thin grille with slim edge becomes almost invisible after installation; Protective plastic cover on the back; Light grill with magnetic catch is easy to attach and remove for spray painting and cleaning; Large dog-eared clamp with non-slip tread for sure installation. Sold singly. |
£149.96
|
Tannoy |
OCV 6 |
 |
Full bandwidth open-ceiling pendant speaker, 6" co-axial, 80Hz-20kHz, transformer 70/100 V selectable 60/30/15/7.5W, IP54, comes complete with hanging kit. Priced and sold per single unit. Available in black or white. |
£187.00
|
Tannoy |
OCV 8 |
 |
Full bandwidth open-ceiling pendant speaker, 8" co-axial, 80Hz-20kHz, transformer 70/100V selectable 60/30/15/7.5W, IP54, comes complete with hanging kit. Priced and sold per single unit. Available in black or white. |
£233.00
|
AMC |
PC5T |
 |
Plastic coaxial 5" ceiling speaker with metal grille, quick fit and built-in line transformer. 100V/10W-5W-2.5W-1.25W, 90Hz - 20kHz, sold as a pair. |
£49.00
|
AMC |
PC5TX |
 |
5 inch 10 W coaxial ceiling loudspeakers. Almost the same structure and
specifications as PC5T, but different sound, better designed for
background music use. Priced and sold per pair.
|
£49.00
|
AMC |
PC6 |
 |
6.5" coaxial low impedance ceiling speaker offering 50w @ 8 ohm, wide 80Hz-20KHz frequency response and 120 degree dispersion. Priced and packed in pairs. |
£59.00
|
AMC |
PC8T |
 |
8" coaxial plastic ceiling speaker with metal grill. Quick and simple to install these wide dispersion (120 degree) speakers feature an integrated 100v line transformer with 20/10/5/2.5w power tappings. Wide frequency response of 80Hz-20KHz and a shallow 95mm installation depth make these speakers extremely versatile. Priced and packed in pairs. |
£69.00
|
RCF |
PL/80A |
 |
Overhead speaker for false ceiling installation offering high quality speech and music reproduction, 100V, 6W, white, each. |
£52.00
|
RCF |
PL/81A |
|
Flush mount high efficiency coax speaker for false ceiling installation, offering high quality speech and music reproduction, 10W, 100V, white, each. |
£99.00
|
RCF |
PL60 |
|
6" twin-cone flush mounted ceiling speaker, white, for false ceiling installation, 6W, 70-100V, each. |
£31.00
|
RCF |
PL70/BS |
|
Overhead loudspeaker with fire dome for false ceiling installation, BS 5839 compliant, offering high speech intelligibility at 150 degree dispersion, 70-100V, 6W, white frame and grid,each. |
£54.00
|
Monitor Audio |
Pro-IC |
 |
Ceiling speaker with 5" MMPII bass driver. Overall diameter: 8 7/16"; Cut-out diameter: 6 13/16"; Mounting depth: 3 7/32". Construction bracket (CB-5) included. |
£87.50
|
Australian Monitor |
QF5A |
|
5" 5w 100V line ceiling speaker includes metal grille and plastic surround, fixing is by two large spring clips in the style of a low voltage downlighter. Warm and discrete sound. |
£20.40
|
Australian Monitor |
QF6 |
|
6.5" dual cone 10w 100V line ceiling speaker. Fixing is by retracting screw pillars hidden behind the grille aiding in quick fitting. |
£23.80
|
Australian Monitor |
QF8 |
|
Sensational sounding dual cone ceiling speaker, with grille, unique lightweight design allows fitting in almost any ceiling, taps are 15w, 10w, 5w, 2.5w and 1.25w. |
£30.60
|
Quad Industrial |
QT-250 |
|
Transformer |
£80.00
|
Australian Monitor |
RF4 |
|
Rapid Fit 4" ceiling speaker & grille combination. Uses ATC5101-6 speaker. Tappings of 5, 2.5, and 0.33W, 100V. |
£11.90
|
Amina |
Shim Kit |
|
Set of shims for use with BackboxFS for non-standard (i.e. not 12.5mm) plasterboard installations. Specify depth required at time of ordering. |
£15.00
|
KEF |
Soundlight System |
 |
Four full range 50mm speakers with twin ported 100mm subwoofer for joist or suspended ceiling installation. Available in white, brushed steel, brass or chrome. |
£312.50
|
Amina |
SPASTD |
|
Single anodised aluminium lightweight 25mm diameter steel adaptor to fit stand to rear of ACPT544E. |
£145.00
|
Audac |
SSP500 |
 |
The SSP500 is a flush mount loudspeaker, especially designed to be
used in rooms with a very high temperature and level of humidity, such
as Sauna's, bathrooms, swimming pool area's ... The sound is generated by a 2-way loudspeaker
section capable of producing a power of 20 Watt RMS, which is built from
a 5" cone driver and a 1" tweeter, producing a natural and detailed
sound which will be highly appreciated. |
£36.90
|
Australian Monitor |
WCM5 |
|
Wall/Ceiling mount speaker. 5, 2.5, 1, 0.5, 0.33 watt tappings. Includes surface mount, 5" speaker and transformer, volume control with relay bypass, and line supervisory cap. |
£34.00
|
Amina |
Wood Adhesive |
|
Adhesive film applied to panel surface. |
£20.00
|
Amina |
Wood Cluster |
 |
The AIW Wood Cluster is a small, high-power loudspeaker (80W, single channel) system for use in
MDF (or similar) and wooden structures where there is not sufficient
space for an AIW5X Wood speaker. |
£825.00
|
Audac |
WS524 |
 |
The WS series are elegant In-Ceiling / In-Wall loudspeakers, designed
for use in any possible application where is need for a sound system
without obvious speakers. They are made of high quality components, to
ensure a beautiful warm sound reproduction of music and speech. The
cone is moisture-proof treated, so they can be used in damp rooms or in
outside applications, the grill and housing can be painted to integrate
seamlessly into your interior. 24W, 100V.
|
£44.28
|
Audac |
WS524/D |
 |
The WS series are elegant In-Ceiling / In-Wall loudspeakers, designed
for use in any possible application where is need for a sound system
without obvious speakers. They are made of high quality components, to
ensure a beautiful warm sound reproduction of music and speech. The
cone is moisture-proof treated, so they can be used in damp rooms or in
outside applications, the grill and housing can be painted to integrate
seamlessly into your interior. 30W 60 ohm.
|
£44.28
|
Audac |
WS624 |
 |
The WS624 is a 2-way rectangular in-wall loudspeaker for high-quality
installation. The loudspeaker combination is fitted with a 4 ¾" low
frequency speaker with a very powerful magnet and a coaxially placed 1"
silk soft dome high frequency tweeter. 100V / 24W. There are power tapping’s
provided for 24W, 12W and 6W at 100V. |
£44.28
|
Audac |
WS624/D |
|
The WS624 is a 2-way rectangular in-wall loudspeaker for high-quality
installation. The loudspeaker combination is fitted with a 4 ¾" low
frequency speaker with a very powerful magnet and a coaxially placed 1"
silk soft dome high frequency tweeter. There are power tapping’s
provided for 24W, 12W and 6W at 100V. 16 ohm / 30W.
|
£40.59
|
